in Manaus Brazil sales price shop near me near me shop factory supplier 4color Flexo Printer Slotter Die Cutter Stacker Machine manufacturer best Cost Custom Cheap wholesaler

  in Manaus Brazil  sales   price   shop   near me   near me shop   factory   supplier 4color Flexo Printer Slotter Die Cutter Stacker Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

Trying to keep in head that great provider is the essential to cooperating with clientele, we attempt to satisfy high top quality standards, offer competitive charges and make certain prompt supply. We inspect each and every piece of bearing by ourselves prior to supply. The product effectively shows environmental safety and power preserving. 1270*2800 4 colour flexo printing slotting amprotary die slicing EPT

Use and overall performance
1.The EPT EPT EPT EPTs adopt renowned manufacturer.
2.The EPT EPT of the EPT adopts 40Gr to be quenched and tempered.
three.All axes are handled with chromium plating to boost the area hardness.
four.The EPT undertake round spray lubrication EPT.
five.The host undertake frequency conversion control.
6.Module layout, any mix of multicolor printing device.

Parameter:

one EPT dimensions MM 1270X2800
2 Max paper size MM 1250X2600(Steady paper)
three Max.design speed Pcs/min one hundred twenty
four Min paper measurement MM 420*600
five Independent feeding size MM 1600X2600
seven Max printing location MM 1200X2400
eight Wall plate thickness EPT200 50mm
9 Feeding precision MM plusmn1.
10 overprint precision(2/3/4color) MM plusmn0.5mm/ plusmn0.75mm/ plusmn1mm
eleven Slotting precision mm plusmn1
12 Die cutting precision mm plusmn1
thirteen EPT roller diameter Phi 410(incEPT printing plate)
14 Total EPT(2/3/4color) 32KW/36KW/40KW

Feeder:
A.Entrance edge feeding technique.(Can also be geared up with ligEPT stress, or force totally free front paper feeding system)

  1. Three aXiHu (West Lake) Dis.s entrance feed, boost the flow of fans, to keep substantial pace, reduced pace paper feeding accuracy, the smallest paper width 350mm.
  2. Change the air flow and strain in four EPTs to match the dimension of the board.
  3. Positioning by the front baffle to reduce feed mistakes, boost paper feeding, printing and die-cutting precision.
  4. Electric management of left and rigEPT baffle.
  5. Electric powered management of rear supporting board.
  6. Entrance paper baffle clearance modified by guide.
  7. Equiped with constant and intermittent paper feeding operate. (optional or steady feed) as needed.

B.Upper and reduced roll

  1. Upper roller:The outdoors diameter is 155mm,wear resistant rubber on the surface area of metal pipe.
  2. Decrease roller: the outer diameter of the 155mm paper feeding roller floor embossed plated difficult.
  3. Feeding strain roller adjustment hole manual adjustment, adjustment assortment -12mm.
  4. The EPT EPT of the strain roller is EPTn by the rolling cross coupling, which minimizes the abrasion and makes the EPT much more well balanced.
  5. EPT clutch, accompanied by sirens, proceed to ring the alarm when traveling, to ensure the safety of operators.
  6. The driving shaft is presented with a friction kind clutch to avoid the misoperation and damage to the EPT.
  7. The major motor is equipped with security unit (not begin EPT locking when the host is not able to switch the cargo).
  8. Paper feeding unit electric computerized zeroing.
  9. The EPT carton use automatic zeroing system, attempt printing 1 to 2 items of cardboard can be modified to the proper situation, lessen cardboard waste.

Printer:
A.EPT roller

  1. The outer diameter is 395.6mm (with diameter of 410mm).
  2. Substantial top quality steel, area grinding, challenging chromium plating.
  3. Scroll hanging model, making use of the rigEPT and left sides of the locking device, so that the more exact edition of the hanging.
  4. Total model of hanging plate hook, adopt 9mm hanging bar.
  5. Loading and unloading printing board, foot switch electric powered handle EPT and reverse.

B.EPT push roller

  1. The exterior diameter is 155mm
  2. Metal pipe surface grinding, hard chromium plating.
  3. The pressure roller hole is adjusted manually, and the adjustment assortment is -12mm.

C.The steel roller (tailored according to customer need for the mesh) (substantial with 250 mesh ,optional ceramic roller)

  1. The exterior diameter is 215mm.
  2. The surface area of the steel pipe is produced of EPT chromium plating approach.
  3. Dot constant, ink uniform.
  4. ProEPT the support daily life of printing plate and rubber roller.
  5. The anilox roller clearance is adjusted manually, and the adjustment selection is -12mm.

D.EPT roller

  1. Uniform ink roller, coated with dress in-resistant rubber, rubber roller high paraEPTc kind, to compensate for the pressure deformation, boost the influence of inking. EPT for the butyl rubber, shore hardness of 60 levels or a lot more, through the EPT result of excellent polish ink. The rubber roller is EPTn by the motor when the EPT is stopped.

2.The exterior diameter is 205mm
3.The rubber roller clearance is altered manually, and the adjustment range is -12mm.
E.Phase changing system

  1. Planetary EPT framework.
  2. The printing section is managed by personal computer and electric powered EPT management (360 degrees)
  3. The transverse path of the printing roller is altered manually, and the adjustment selection is 5mm.
  4. The printing plate roller uses the electric adjustment phase, to return to zero and the edition velocity is rapid, adjusts the edition precision to be large.

F.Paper feeding roller
1.Paper feeding upper roller, outer diameter of 86mm, large good quality steel plated challenging chromium with four XiHu (West Lake) Dis.Hu (West Lake) Dis. wheel diameter of 125mm.
2.Paper feeding lower roller, outer diameter is 155mm, XiHu (West Lake) Dis.Hu (West Lake) Dis. paper roll plating difficult chromium.
3.The XiHu (West Lake) Dis.Hu (West Lake) Dis. roll hole is modified manually, and the adjustment variety is -12mm.
G.Ink circulation structure

  1. Pneumatic diaphragm pump for ink security, simple procedure and maintenance.
  2. Ink filter,EPT impurities

H. EPT roller fiXiHu (West Lake) Dis.ng gadget

  1. Adopt pneumatic brake system. When the device is used for separating and modifying the period or cleaning, the brake system limits the EPT to rotate, and the fastened position of the unique EPT place is maintained.
  2. The EPT EPT of the stress roller is EPTn by the rolling cross coupling, which decreases the abrasion and helps make the EPT more stable.

Slotter:
one.The outer diameter of the cutter shaft is 156mm, the outer diameter of the cutter shaft is 156mm, and the surface area is plated with tough chromium.
2.Press line wheel clearance guide adjustment.
three.Width of slotting cutter 7mm. Alloy metal substance.
four.Slotting knife seat clearance worm EPT box adjustment, dial screen, adjustment range – 10 mm.
five.Planetary EPT framework for slotting section adjustment
6.Slotted section making use of the period controller EPT 360 degree adjustment (run, quit can be adjusted)
7.Handbook synchronization change box peak.
eight.The prime and bottom rollers of the stress line are one hundred ten mm, which is made of large top quality thick wall seamless metal tube, and the floor is difficult to be plated with hard chromium. The wire diameter phi 176.

Die-chopping:
A. EPT pad roller
one.The outer diameter of the rubber pad roller is 388.9mm.
2.EPT pad roller for higher good quality metal, surface area grinding, hard chromium plating.
three.EPT pad thickness 8mm, width 250mm.
4.The adjustment of the hole in between the pad roller and the cutter roller adopts manual adjustment, and the adjustment range is -16mm.
5.EPT payment composition of rubber pad roller, automated control of pad roll speed.
six.EPT pad roll slicing flat construction, hold the pad roll.
7.The rubber pad roller adopts the 1:900 motor crankshaft rotation conversion to 30mm swimming transverse framework.
B.Die chopping roller

  1. Die roll 360mm.
  2. The die roller is of substantial quality steel, the surface is grinded, challenging chromium plating.
  3. Dynamic stability correction, enhanced running steadiness.
  4. Die mounted screw gap spacing, horizontal 100mm, radial twelve, screw gap M10.
  5. Application of line heigEPT 22.60mm
  6. EPT template thickness 13mm, blade heigEPT twenty five.4mm.
  7. The cutter roller adopts guide adjustment, the adjustment range is 10mm

C.Die slicing stage altering mechanism planetary EPT sort composition.

  1. Die chopping period making use of the computer and electric EPT management 360 diploma adjustment (operate, cease can be adjusted).
  2. Press line wheel clearance guide adjustment, adjust the scope of 1-12mm, using the cross sliEPTmechanism, alter the EPT EPT alwaEPTensure the right meshing point out.
  3. Base cutter makes use of the worldwide model rubber pad.

Supply Photos:

Carton box photos:

Buyer Pay a visit to:

Manufacturing facility EPT Process:

  in Manaus Brazil  sales   price   shop   near me   near me shop   factory   supplier 4color Flexo Printer Slotter Die Cutter Stacker Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Manaus Brazil  sales   price   shop   near me   near me shop   factory   supplier 4color Flexo Printer Slotter Die Cutter Stacker Machine manufacturer   best   Cost   Custom   Cheap   wholesaler