Tag Archives: machine

China 12V 24V 30KG 40KG.CM high torque dc gear motor for vending machine worm gearbox china

2023-06-15

China Custom Professional Standard Full Automatic Assembly Machine Aluminum Gearbox double reduction worm gearbox

Product Description

Product description

Professional Standard Full Automatic Assembly Machine Aluminum Gearbox

Item No.

9.311

Ratio

1:3

Teeth

12/36

Module

4.35

HP

50

Rated Input

540rpm

Input/Output Description

Hexagon Spline

Optic Axis

Net Weight

21kg

 

 

Our Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various
power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output
very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and
fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and
maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts
include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is
low.
11.Our gear box have reached the advance international level, can replace the same kind of products imported.
Recommend product

WPA WPS Cast Iron Case Worm Gearbox

Marine Gearbox For Work Boat

MW High Torque Transmission Gearboxes

90 Degree Reducer For Concrete Mixer

Worm Gearbox Reduction For Conveyor Mill Machine

Right Angle Worm Gear Box

Gear Reducers For Belt Conveyor

 

 

HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our CZPT in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

Customized Support: OEM, ODM
Applicable Industries: Hotels, Garment Shops, Building Material Shops
Output Speed: 1440rpm
Customization:
Available

|

worm reducer

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Custom Professional Standard Full Automatic Assembly Machine Aluminum Gearbox   double reduction worm gearboxChina Custom Professional Standard Full Automatic Assembly Machine Aluminum Gearbox   double reduction worm gearbox
editor by CX 2023-06-05

China Casing Industrial Speed Reducer NRV110 Shaft Input Iron OEM Cast Iron Worm Gearbox for Drilling Machine Synthetic & Mineral 13.5 worm gearbox backlash

2023-05-15

China Gphq Low Price Gphq RV Gearbox for Industry Machine double stage worm gearbox

Solution Description

NMRV worm gearbox motor 

NMRV series worm equipment reducer:
Its structure,outline and set up proportions as nicely as efficiency are very same with that of
Europe an goods,they are interchangeable,and the supplies and machining procedure are superior internationally.The product is showcased by:
one.Minimal noise and temperature rise.
2.Higher bearing ability,clean run and prolonged provider existence.
three.ompact composition,samll volume,light fat,gorgeous form and straightforward to set up.
four.Can operate continuously below server setting,and has a very good dependability.

GPHQ NMRV aluminum worm gearbox motor particulars:

Type GPHQ NMRV Worm Equipment Speed Reducer /gearbox motor 
Model: NMRV25/30/ 40/ 50/ sixty three/ 75/ ninety/110/130/150
Input Power: .06KW,.09KW,.12KW,.18KW,.22KW,.25KW,.37KW,.55KW,.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5,
100B14,112B5,112B14 132B5,160B5
Ratio 1: 7.5,10,fifteen,twenty,25,thirty,40,fifty,60,eighty,100
 
 
 
Material 
Housing:  Die-Solid Aluminum Alloy for rv25-rv90 , die-forged forged iron for rv110 to rv150 
Worm Gear-brass+solid iron 
Worm-20CrMn Ti with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium metal-forty five#
Color: Blue/Silver Or other people if quantity is large
Packing: Carton or plywood  Case
Assure time : one Yr apart from apart from Male-produced destruction
Usages: Industrial Equipment: Foods Things, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft: output strong shaft or output hollow shaft 

FAQ
one, Q:what is your MOQ for ac gearbox motor  ?
A: 1pc is okay for every kind electric gear box  motor 

two, Q: What about your guarantee for your induction pace reducer motor ?
A: 1 calendar year ,but except male-created wrecked

three, Q: which payment way you can acknowledge ?
A: TT, western union .

four, Q: how about your payment way ?
A: a hundred%payment in superior less $5000 ,30% payment in innovative payment , 70% payment prior to sending more than $5000.

five, Q: how about your packing of pace reduction motor  ?
A: plywood scenario ,if dimensions is little  ,we will pack with pallet for much less 1 container 

6, Q: What data should be presented, if I purchase electric powered helical geared motor  from you ?
A: rated electrical power,  ratio or output velocity,sort ,voltage , mounting way , amount , if much more is better.

US $20-200
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Step: Single-Step
Motor Power: 0.09kw-15kw

###

Customization:

###

Type GPHQ NMRV Worm Gear Speed Reducer /gearbox motor 
Model: NMRV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150
Input Power: 0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW,0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5,
100B14,112B5,112B14 132B5,160B5
Ratio 1: 7.5,10,15,20,25,30,40,50,60,80,100
 
 
 
Material 
Housing:  Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150 
Worm Gear-brass+cast iron 
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Color: Blue/Silver Or others if quantity is big
Packing: Carton or plywood  Case
Guarantee time : 1 Year except except Man-made destruction
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft: output solid shaft or output hollow shaft 
US $20-200
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Step: Single-Step
Motor Power: 0.09kw-15kw

###

Customization:

###

Type GPHQ NMRV Worm Gear Speed Reducer /gearbox motor 
Model: NMRV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150
Input Power: 0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW,0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5,
100B14,112B5,112B14 132B5,160B5
Ratio 1: 7.5,10,15,20,25,30,40,50,60,80,100
 
 
 
Material 
Housing:  Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150 
Worm Gear-brass+cast iron 
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Color: Blue/Silver Or others if quantity is big
Packing: Carton or plywood  Case
Guarantee time : 1 Year except except Man-made destruction
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft: output solid shaft or output hollow shaft 

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
worm reducer

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Gphq Low Price Gphq RV Gearbox for Industry Machine     double stage worm gearboxChina Gphq Low Price Gphq RV Gearbox for Industry Machine     double stage worm gearbox
editor by czh 2023-01-08

China Zlyj Gearbox/Gear Box for PVC Extruder Machine Reduction Gearbox gearbox worm box

Solution Description

1) Little quantity
2) Huge transmission torque
3) Substantial performance
4) Lower usage

Parameters :

Type Spec Input Electricity
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 5.5 800 one hundred 525 35 Ø35 twenty five:01:00
133-8 eight 800 one hundred 764 39 Ø50 25:01:00
146-ten 11 one thousand 100 1050 fifty four Ø55 25:01:00
173-ten 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 thirty 1000 80 3581 one hundred fifty five Ø75 twenty five:01:00
225-12.five 45 a thousand 80 5371 180 Ø90 twenty five:01:00
250-sixteen fifty five 1120 70 7503 192 Ø105 25:01:00
280-sixteen 75 960 sixty 7643 258 Ø110 twenty five:01:00
315-16 85 960 60 13528 287 Ø120 twenty five:01:00
330-sixteen 110 960 60 17507 360 Ø135 twenty five:01:00
375-sixteen 132 960 sixty 21008 390 Ø150 twenty five:01:00
395-sixteen 185 960 sixty 29442 four hundred Ø160 twenty five:01:00
420-16 160 960 sixty 31831 430 Ø160 25:01:00
420-16 220 960 sixty 31831 430 Ø170 twenty five:01:00
450-twenty 213 one thousand 60 40640 five hundred Ø160/Ø170 twenty five:01:00
560-17 540 one thousand 50 84034 seven-hundred Ø200 25:01:00
630-ten 540 1000 fifty 15712 770 Ø250 25:01:00

ZLYJ gearbox sequence are transmission devices, which are specifically made for one-screw extruder with high precision, challenging equipment surface area, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050.1-1999, all CZPT gearboxes are made accordingly.
Major Features:
1. The substance of gear is the large strength alloy steel, it is created by carburizing, quenching (and other heat treatment), gringding approach at final. The equipment is in large precison ( 6 grade ) and large hardness ( reaches HRC54-62). Apart from, it features low noise when running.
2. It consists of large bearing potential thrust, which is performed reputable and can endure greater axial thrust.
three. All the things are treated by compelled lubrication and cooling method except really few little specification goods.
4. CZPT series gearbox is adopted by 6-side processing box. Its standard set up is horizontal, but can also be modified to vertical set up in accordance to customer’s requirment.
five. Efficiency transmission, lower sound, lengthy operaton time.
Package deal

Packing for screw and barrel
one) Picket scenario bundle
two) Plastic movie package
3) Appropriate to transportation

Why choose us?
A> lengthy time expertise and historical past
B> long time nitriding treatment and heating remedy by by itself
C>advanced Fanuk collection CNC pc-controlled milling equipment
D>depth hole drilling machine in 8meters length, which make sure the straigtnss of barrel within.
E> CAD drawing affirmation before commence producing
F> Prompt after sale support
G>Land proprietor and registration funds twenty five, 000, 000RMB

About us:

ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series, t die, filter and extruder machine. It has become one of the largest supplier of main parts in HangZhou city which 
is the basement of plastic machines. 
If there is any dilemma, you can speak to with us at any time, we will reply you as soon as possible!

US $400-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Reducer
Function: Speed Reduction
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Stepless

###

Customization:

###

Type Spec Input Power
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00
US $400-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Reducer
Function: Speed Reduction
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Stepless

###

Customization:

###

Type Spec Input Power
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

The Different Types of Gearboxes

There are many different types of gearboxes. Some brands have more than one type. In this article, we’ll discuss the planetary gearbox, the worm reduction gearbox, the shaft mounted gearbox, and the one speed gearbox. This article will also help you determine which type of gearbox is best for your vehicle. And don’t worry if you don’t know the terminology yet. We’ll explain each type in detail so that you know what you’re getting yourself into.
gearbox

Planetary gearbox

Planetary gears have many advantages. The multiple gears in a planetary gearbox mesh simultaneously during operation. As such, they provide high efficiency and transmit high transmittable torque. These gears are widely used in various industries and are resistant to high shock loads and demanding conditions. CZPT is one of the companies that offer planetary gearboxes. Its products do not require special tools for assembly, and its scalable design minimizes safety stock.
Among the numerous benefits of planetary gearing is its compactness and lightweight. As such, it is suitable for wide applications with space and weight constraints. However, to truly appreciate its benefits, it is necessary to understand its mechanisms. Here are some of the most common details about planetary gearing:
The planetary gearbox has two mounted gears: an input shaft and an output shaft. Each gear has multiple teeth that are attached to a carrier and rotate with the input shaft. The carrier is connected to the output shaft. A planetary gear is mounted on both gears via a carrier. The carrier rotates in order to drive the planetary gear. The sun gear is often the input gear. The other gear is called the outer gear.
Planetary gearboxes are highly customizable. The size, mounting, and housing options vary, as do the reduction ratios and input speeds. Different types can be manufactured for different applications and include options such as electrical or mechanical preload. The final design of a planetary gearbox can be highly customized, based on the specifications of the application. By combining engineering excellence and ongoing innovation, planetary gearboxes provide years of trouble-free operation.
A planetary gearbox can be either an electric motor or a manual one. The latter has more features than the former, and can be used in applications where space is an issue. The primary features of a planetary gearbox include its backlash, torque, and ratio. Secondary features include noise, corrosion resistance, and construction. A planetary gearbox is a highly versatile gearbox that can drive anything from simple machinery to advanced electrical systems.
gearbox

Worm reduction gearbox

The global worm reduction gearbox market report compiles key insights from the industry to help you improve your business strategy. This report will help you create a comprehensive business document that will enhance your company’s competitive edge. To obtain this report, visit our website now! Read our latest report to find out what you can expect from the global worm reduction gearbox market. Alternatively, request a sample copy for more details. Here is a sneak peek of the report:
Worm gears are made with different thread counts and are usually not matched with the CZPT standard. In general, a single thread worm should be used with a single thread worm. Worm gears have either right or left threads, and their thread count will be different as well. This type of gear is used to reduce the speed of a rotating shaft. The speed reduction ratio will be about 50 percent if the worms have the same thread count as the CZPT gears.
The standard gear set transfers power at the peak load point of a tooth, called the pitchline. The worm gear moves slowly against the wheel’s metal surface. The worm gear is also more complex than the standard gear because the worm is sliding rather than rolling. Worm gears are hard to lubricate. Moreover, the sliding contact between the gear and worm increases the complexity of the gear set. They can be a great solution for applications where noise is a significant factor.
The axial pitch and circular pitch of the worm are equal. The ratio of these two indices determines the speed of transmission. For a worm reduction gearbox to work, the axial pitch and the circular pitch must match. The pitch angle of a worm can either be left-handed or right-handed. The lead of a worm is the distance one thread travels in one revolution. The lead angle is the angle tangent to the thread helix of the cylinder’s pitch. When a worm mesh is reversed, the majority of the mesh will be on the receding arc.
Worm gears generate more heat than their counterparts, so it is important to choose a worm reduction gearbox carefully. You will want to choose the material and amount of lubricating oil carefully. Worm gears are generally made of tin bronze. The paired worms are hardened to HRC45-55. In general, they are durable, lasting up to ten years. But they will wear out – and they wear out – so you may want to consider some other factors.

Shaft-mounted gearbox

Shaft-mounted gearboxes are designed for a variety of mining and quarry applications. Their high reliability and low maintenance make them an excellent choice in these types of applications. Shaft-mounted gearboxes also feature an optional backstop device that prevents the unit from rotating in one direction. This makes them an excellent choice for applications where alignment accuracy is an issue. Here are some of the benefits of using a shaft-mounted gearbox:
Shaft-mounted gearboxes are typically constructed of aluminium, and come in sizes ranging from 050 to 125. They feature a variety of reduction ratios and ensure optimum efficiency in all operating conditions. New S series sizes, 140 and 150, extend the application range of shaft-mounted gearmotors. They are both backed by a two-year warranty. For even greater peace of mind, Shaft-mounted gearboxes are available with a range of warranty options.
The most common applications for a Shaft-mounted gearbox include traction-driven applications where a low-speed shaft is required for operation. They also are suitable for applications without a foundation, where the motor is mounted next to the reducer. To prevent the gear drive from rotating, a torque arm is attached between the motor and the shaft. Small-sized shaft-mounted gear drives are usually made without motor mount kits, which can make them an excellent choice for conveying light loads.
Another important feature of a Shaft-mounted gearbox is its mounting position. The reduced motion through the drive is redirected through the shaft, creating additional forces. These additional forces can affect the performance of the gearbox, causing vibrations and noise. Consequently, it is important to replace worn or damaged belts on a regular basis. Further, shaft-mounted gearboxes can be affected by problems with other components and amplify vibrations.
gearbox

1 speed gearbox

CZPT Group Components produces one speed gearboxes. These transmissions are produced in the CZPT Group’s Kassel plant. They are compact and robust, and are designed for easy integration. The Bosch Rexroth GD1 one-speed gearbox is easy to install horizontally or vertically. The Plug and Drive system integrates the gearbox with the existing cooling system. There are many other benefits to this gearbox.
With an ID.3 electric drive motor, the maximum torque is delivered at 16,000 rpm. This single-speed transmission offers high power density and excellent noise-reduction, making it ideal for electric vehicles. The e-drive motor is extremely quiet and requires precision manufacturing. The e-drive motor also enables a wide range of driving conditions. It can reverse when needed, and reaches its maximum speed at 16,000.
The single-speed gearbox is a standard feature on most electric vehicles. Some electric vehicles, such as the Porsche Taycan, will be equipped with a two-speed gearbox. This gearbox offers more top speed and range, but it is more complex than a standard single-speed gearbox. CZPT doesn’t need to add complexity to its electric vehicles. After all, a 355 horsepower family wagon is not likely to need a dual-speed gearbox.
In addition to simplifying the transmission, the patent claims also address improvements in structural design. Fig. 5 shows a schematic representation of a transmission 50′, wherein gear sets Z1 and Z4 are exchanged between partial transmissions. This switch matrix also reflects the synchronized gears and lastshelf gears. Hydraulically betatigte Lamellenkupplungen (HBA) also form a last-shelf gear.
Another advantage of the patent claim is that it offers numerous functional freedoms, which is especially valuable in the design of an automobile. One of the patent claims identifies a tosatzlicher middle gear that allows a driver to switch between second and third gears, with a single gearbox. In a conventional one-speed transmission, the tosatzlicher middle gear is attached to the second and first part gearbox. The latter has a second and third gear.

China Zlyj Gearbox/Gear Box for PVC Extruder Machine Reduction Gearbox     gearbox worm boxChina Zlyj Gearbox/Gear Box for PVC Extruder Machine Reduction Gearbox     gearbox worm box
editor by czh 2022-12-01

china factory Machine Drive Precision Involute  Injectiontransmission Helical Plastic Gear manufacturers

Item Description

Equipment CZPT CZPT Involute Replicate InjectionTransmission CZPT cal Plastic Equipment

 

Gears content Nylon+Glass Fiber,GF-Stomach muscles,POM,PP,Personal computer,PA66,UHMW-PE,PPS and so on.
Process Injection molding ,CNC machining ,Extrusion approach
Surface Matted/Sleek, as CZPT ers’ drawongs
Measurement OEM or CZPT ized as drawing
Shades Nature White Black Yellow Red Blue
Application Sector gears : Packing devices/Filling /beer devices /Conveyor tools ,Mine Products and so on.
Electronic equipment: hausehold appliances,VR,exact instrument
Automobile spare components: addresses, gears, bushing ,pipes ,and so forth.
 
Molding sort General Molding, Insert Molding, Over Molding ,Double color molding
Cavities Straightforward, Multi -cavities(10-40)
Value Advantaged costs ( Direct from CZPT factory)
Sample Free of charge sample supply
Molding time fifteen-25days
Supply time 7-15days soon after sample top quality confirmed

Generation:
1. The personnel are trained to examine the gears and discover any defect in production in time.
two. QC will check 1pcs each 100pcs in CNC machining, and gears will meet all dimension tolerances.
3. Gears will be inspected at every single action, and gears will be inspected ahead of shipment, and all inspection documents will be kept in CZPT manufacturing facility for three years.
four. Our product sales will send out you images at every gears generation steps, and you will know the detailed generation status, and you can observe any chance of error, for CZPT income, QC and employees are keeping near observe on all generation.
five. You will come to feel us functioning very cautiously to guarantee the quality and straightforward to function with, 
six. we cherish each and every inquiry, every single opportunity to make gears and areas and cherish every single CZPT er.

 QUALITY Control Process:
 
1)       Inspecting the uncooked substance –IQC)
two)       Checking the information ahead of the creation line operated
3)       Have total inspection and routing inspection in the course of mass generation—In method high quality manage (IPQC)
four)       Checking the gears following generation completed—- (FQC)
five)       Checking the gears soon after they are completed—–Outgoing quality control (OQC)

Provider:
1. Molds designs as for every CZPT ers’ gears drawing
2. Submitting molds drawings to CZPT ers to overview and affirm before mols production.
3. Delivering samples with whole dimensions and cosmetic inspection report, content certification to CZPT ers.
four. Providing inspection report of essential dimensions and cosmetic in batches areas.

Packing and shipment:

one. Gears are properly and very carefully packed in PP bags in CTNS, powerful adequate for express shipping and delivery, air cargo or sea shipment.
two. Air shipment, sea shipment or shipment by DHL, UPS, FedEx or TNT are availabe.
3. CZPT terms: EXW, FOB HangZhou, or CIF
4. All shippings will be very carefully organized and will get to your places CZPT and properly.

 

FAQ

Q1: How to assure the Top quality of gears and parts?
We are ISO 9001:2008 certified factory and we have the built-in program for industrial parts quality management. We have IQC (incoming quality manage), 
IPQCS (in procedure high quality manage part), FQC (closing quality management) and OQC (out-likely high quality management) to manage each method of industrial areas prodution.

 Q2: What are the Advantage of your gears and elements?
Our gain is the aggressive and realistic rates, CZPT shipping and delivery and higher high quality. Our eployees are accountable-oriented, pleasant-oriented,and dilient-oriented. 
Our industrial elements goods are showcased by rigid tolerance, smooth finish and CZPT -daily life functionality. 

Q3: what are CZPT machining equipments?
Our machining equipments consist of plasticn injection machinies, CNC milling equipment, CNC turning equipment, stamping devices, hobbing devices, automatic lathe devices, tapping equipment, grinding equipment, chopping machines and so on. 

Q4: What delivery approaches do you use?
Generally, we will use UPS DHL or FEDEX and sea shipping 

5: What components can you method?
For plastic injection gears and components, the components are Nylon, PA66, NYLON with thirty% glass fibre, Stomach muscles, PP,Computer,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA and so forth.
For steel and machining gears and components, the components are brass, bronze, copper, stainless metal, steel, aluminum, titanium plastic etc. 

Q6: How CZPT is the Shipping and delivery for Your gears and components? 
Usually , it will just take us 15 functioning times for injection or machining, and we will consider to shorten CZPT guide time.
 

china  manufacturing unit Machine Drive Precision Involute  Injectiontransmission Helical Plastic Equipment producers

china supplier POM Plastic Custom Precision Machine Shaft Drive Cylindrical Spur Gear manufacturers

Product Description

HangZhou CZPT xin Steel & Plastic Products Co.,Ltd is an ISO 9001–2000 accredited company for CZPT parts, focus on producing injection mold plastic products and plastic components,we providing various varieties goods allover the globe.

We have professional CZPT team which has more than 5 engineers who is excellent at plastic injection mold layout, we can provide a single cease provider from drawing design, resources & samples producing, mass productions, packing till shipment. In addition to carry out entire approach inspection, CZPT specialists also can offer technical help & session services.

Product sales crew are considerate and good at comprehending your thought and points, where help to make your operate considerably eaiser. 24*7 comminication provider, whenever you require us, we are right here for you

We have abundant activities to cooperate with makers, wholesaler, investing organizations and agents in North CZPT ica,western CZPT pean countries, this kind of as United states, Canada, Germany, France, CZPT , Spain, Holland, and so forth. So we have self-assurance to match different CZPT ers and CZPT requirments. 

In all, let us to be your reliable CZPT spouse!

one. CZPT /ODM orders are appropriate.

2. CZPT your personal plastic products with Symbol.

3. Superb style crew,

4. Skilled technological team

5. CZPT d machines and products.

6. Professional revenue staffs

7. Lively services crew

8. Material:PP/P/PE/Abdominal muscles/PLA/PA/TPR

nine. CZPT Time 20- 40 Days

 

1. Are you a trading company or a manufacturer?

     We are a manufacturer with CZPT personal trade organization.

two. What variety of trade phrases can you do?

        EX-Functions,FOB,CIF,DDP, DDU
 
3. Do you often modify the substance to decrease the value?

     No,we will guarantee the mould good quality and life ,unless of course the CZPT er have the request .we are
     sincerely handle all CZPT ers . 

four. Can you guarantee the quality ?
   
      Yes ,We have a professional quality inspection office,the mold is strickly examined just before cargo.also ship the plastic items sample to you for examining the        mildew s quality .
  
5. Do you help CZPT ?
 
    Of course, we can produce by specialized drawings or samples. 

6.Can I test my thought/part prior to committing to mould device manufacture?

    We have a professional design and style staff who will appraise your needs for layout and features and give you an answer.

seven.What type of plastic is greatest for my design/ingredient?

    CZPT selection relies upon on the software of your layout and the environment in which it will perform. We are really glad to  discuss the alternatives and give you      best suggestions .
 
8. How about your shipping time?
 
    Usually, it consider 40 times ( 30 days do mold and ten times do mass creation).

china  provider POM Plastic Personalized Precision Equipment Shaft Generate Cylindrical Spur Gear manufacturers

china Custom Hydraulic Gear Pump Hunting Penis Gear Shift Knob Plastic Worm Bicycle Set Hob Machine Fixed Frame DC Motor Helical Prices Stainless Steel Swing Planetary manufacturers

Item Description

Hydraulic gear pump looking penis gear shift knob plastic worm bicycle set hob machine fixed frame dc motor CZPT cal costs stainless metal swing planetary 

china  Personalized Hydraulic Gear Pump Looking Penis Gear Change Knob Plastic Worm Bicycle Established Hob Device Fixed Body DC Motor Helical Costs Stainless Steel Swing Planetary makers

china Cheap Straight Bevel Gear Set Miter Spiral 90 Degree Forged Plastic Sintered Metal Stainless Steel Test Machine Curtain Roller Bevel Gear Lifting Jack Miniature manufacturers

Item Description

Straight Bevel Gear Set Miter Spiral 90 Degree Forged Plastic Sintered CZPT CZPT Steel Check CZPT Curtain Roller Bevel Equipment CZPT ing Jack Miniature

 

china  Inexpensive Straight Bevel Equipment Established Miter Spiral 90 Diploma Cast Plastic Sintered Steel Stainless Steel Check Equipment Curtain Roller Bevel Gear Lifting Jack Miniature manufacturers